4 Copy
144
Copy
4
Paper Supply (Selecting the Paper for Copying)
This feature allows you to select the tray that holds the paper you want to use.
1 Select a paper tray.
îš„ Feedback area
Selected tray, remaining amount, size, kind, and weights of paper are displayed.
Note •When nonstandard size is selected and the name of the size is registered, the name is displayed on
the feedback area. For more information, refer to "When [Preset Custom Size] is Selected" (P.219).
îš„ Auto Select
Automatically determines the tray holding the appropriate paper, based on the document
size and the specified copy ratio.
Note •This cannot be selected together with [Auto %] under [Reduce/Enlarge].
îš„ Trays (2nd to 5th buttons)
Allows you to directly select the desired tray.
You can change the paper tray associated with each button on the [Copy] screen. For information on the settings, refer to
"Paper Supply - Button 2 - 5" (P.458).
îš„ More
Displays the [Paper Supply] screen.
For information on the settings on the [Paper Supply] screen, refer to "[Paper Supply] Screen" (P.145).
Checking the Remaining Amount of Paper in a Tray
The icons displayed in the indication areas for each tray allows you to check the remaining
amount of paper loaded in the tray.
: Indicates that the remaining amount of paper is 25 to 100%.
: Indicates that the remaining amount of paper is 25% or less.
: Indicates that the tray has run out of paper, or no paper is loaded in the tray.
You can view the icons to check the remaining
amount of paper in a tray.
To Next Page
Loading...
Need help?
General
