Registering/Deleting/Renaming Stored Programs
335
Stored Programming
8
Deleting Stored Programs
The following describes how to delete stored programs.
1 Select [Delete].
2 Select the number to be deleted.
Note •Select [ ] to return to the previous screen or [ ] to move to the next screen.
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.88).
3 Select [Delete].
Note •Deleted stored programs cannot be restored.
Entering/Changing a Stored Program Name
The following describes how to enter or change the name of a stored program.
Up to 18 characters are allowed for a stored program's name.
For information on how to enter characters, refer to "Entering Text" (P.90).
1 Select [Enter/Change Name].
2 Select the number to register or change a name.
Note •Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.88).
• Select [ ] to return to the previous screen or [ ] to move to the next screen.
3 Enter a name, and select [Save].
To Next Page
Loading...
