Register Paper Feeding Positions
723
Maintenance
21
Register Paper Feeding Positions
The paper feeding position is adjusted automatically.
You can select the tray and enter the number of sheets for this adjustment. When you select
[Start], the sheets you set feed and the paper feeding position is automatically adjusted.
You can select Tray 1 to 3, 5 (bypass), 6 and 7 (optional).
Note • The paper used for this adjustment is a blank paper and it is not charged.
1 Load the paper in the tray to adjust the paper feeding position.
2 Press <Log In/Out> button.
3 Enter the system administrator’s user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
displayed on the screen, and select
[Enter].When a passcode is required, select
[Next] and enter the system administrator’s
passcode, and then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
4 Select [Tools] on the Services Home screen.
5 Select [System Settings] > [Common Service
Settings] > [Maintenance].
123
456
789
0
＃
To Next Page
Loading...
