21 Maintenance
724
Maintenance
21
6 Select [Register Paper Feeding Positions].
Note • Select [ ] to display the previous screen or
[ ] to display the next screen.
7 Select [Paper Supply].
8 Select the tray to adjust the paper feeding
position and select [Save].
9 Enter the number of sheets to output for
adjustment and select [Start].
10 Registering the paper feeding position starts. Papers set in step 9 are output.
Note • When Tray 6 or Tray 7 is selected, the double number of papers set in step are 9 output.
11 When Register Paper Feeding Position is
finished properly, the screen on the right is
displayed.
To Next Page
Loading...
