Fuji Xerox Versant 80 Press

4 Copy
128
Copy
4
Step 2 Selecting Features
The following two services are available to copy documents.
 Simple Copy
Allows you to only select basic features to copy documents.
 Copy
Allows you to make detailed settings to copy documents.
For information on Simple Copy, refer to "Simple Copy" (P.135).
The following describes how to select features on the [Copy] screen.
Note •The features displayed on the screen depend on the configuration of your machine.
• When the Authentication or Accounting feature is enabled, a user ID and passcode may be required.
Ask your system administrator for the user ID and passcode.
1 Press the <Services Home> button.
2 Select [Copy].
3 If the previous settings still remain, press the
<Clear All> button.
4 Select each tab, and configure features as
necessary.
The following shows the reference section for each tab.
"Copy" (P.140)
<Services Home> button
123
456
789
0
＃
<Clear All> button