22 Problem Solving
896
Problem Solving
22
When the Lamp [E3] is Lit
1
Make sure that the machine has stopped, and
press the button on the right cover of the
Trimmer unit to open the cover.
2 Remove the jammed paper.
3 Close the right cover of the Trimmer unit.
Note • A message will be displayed and the machine
will not operate if the right cover of the
Trimmer unit is even slightly open.
Paper Jams in the Finishing Transport Module
If paper jams inside the Finishing Transport Module (Optional), the lamp of the jammed
position lights up. Follow the paper jam clearance procedure corresponding to the lighting
lamp.
When the Lamp 1 is Lit............................................................................................................................................................... 897
When the Lamp 2 is Lit............................................................................................................................................................... 897
When the Lamp 3 is Lit............................................................................................................................................................... 898
When the Lamp 4 is Lit............................................................................................................................................................... 899
To Next Page
Loading...
