Scan to PC
263
Scan
5
[Type 2]
Address Book (Specifying a Destination Using the Address Book [Type 1])
The following describes how to specify a destination using the Address Book [Type 1].
1 Select [Address Book].
2 Select the destination to store the data in.
Important • You can only use destinations configured for
SMB or FTP.
Note •Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• During scrolling the list, is not displayed.
When scrolling stops, is displayed again.
• Scroll the list by drag or flick operation to
switch the screen to be displayed.
For information on how to drag or flick, refer to "Touch Screen" (P.88).
(List/Thumbnail)
Allows you to switch the number of the recipients displayed from list (five items) or
thumbnail (15 items).
#
Lists the speed dial number.
Name
Lists recipient names and protocols.
Go to
Enter a recipient number using the numeric keypad to display the recipient at the top of the
list.
Allows you to confirm information, such as [Name] and [Server Name/IP Address], on the
screen displayed.
All
Lists all the registered recipients for using SMB or FTP protocol.
To Next Page
Loading...
