Fuji Xerox Versant 80 Press

8 Stored Programming
336
Stored Programming
8
Assigning/Changing Icons for Stored Programs
The following describes how to assign or change an icon of a stored program.
You can select from 12 icons.
1 Select [Assign/Change Icon].
2 Select the stored program number to assign or change an icon.
Note •Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.88).
• Select [ ] to return to the previous screen or [ ] to move to the next screen.
3 Select an icon, and select [Save].
 No Icon
No icon is assigned to a registered stored program.
 Icon
Select an icon according to the content of the registered stored program.