Fuji Xerox Versant 80 Press - Print Mode

Machine Information
629
Machine Status
19
2 Check the overwriting status of the hard disk.
Print Mode
You can print the programming settings configured in the ESC/P-K emulation mode and
retrieve the programming.
Note •The items displayed vary depending on the options installed.
1 Press the <Machine Status> button.
2 Select [Print Mode].
3 Select [Off-line] or [On-line].
 Off-line
The machine does not accept data from a computer. Any data being sent is cancelled and
not printed.
 On-line
The printer accepts data from a computer.
4 Select a printer language to set a print mode.
5 Set each item.
Note •The items displayed vary depending on the
printer language.
Retrieve Programming
You can retrieve and use settings registered in memory.
1 Select [Retrieve Programming].