Job Assembly
205
Copy
4
Job Assembly
This section describes the features you can select on the [Job Assembly] screen.
Build Job (Processing Documents Scanned with Different Settings as One Job) .........................................................205
Sample Job (Checking the Finished Output of the Copy)...................................................................................................209
Combine Original Sets (Adding Originals) .............................................................................................................................210
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area).........................................................212
Stored Programming (Calling a Stored Program for Build Job) .......................................................................................213
1 Select [Copy] on the Services Home screen.
2 Select a feature on the [Job Assembly] screen.
Note •Select [ ] to return to the previous screen or [ ] to move to the next screen.
• Drag or flick the screen vertically to switch the screen to be displayed. For information on how to
drag or flick, refer to "Touch Screen" (P.88).
Build Job (Processing Documents Scanned with Different Settings as One
Job)
This feature allows you to apply different copy settings to each document page or each
document stack, and then output the copies as one job.
1 Select [Build Job].
2 Select [On].
To Next Page
Loading...
