Fuji Xerox Versant 80 Press

21 Maintenance
720
Maintenance
21
Adjust Image Transfer Using Sample Printout
You can adjust the transfer output value by scanning a sample printout when image
transfer is poor.
1 Load paper for adjusting the transfer output value in a tray.
2 Press the <Log In/Out> button and enter the System Administration mode.
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.404).
3 Select [Tools] on the Services Home screen.
4 Select [System Settings] > [Common Service
Settings] > [Paper Tray Settings].
5 Select [Custom Paper Settings].
6 Select a paper type to adjust the transfer
output value and then select [Change
Settings].
7 Select [Adjust Image Transfer] and then select
[Change Settings].
8 Select [Select Sample Number] and then select
[Sample Printout].