Fuji Xerox Versant 80 Press - From (Setting the Senders Address)

5 Scan
242
Scan
5
 E-mail Address
To change the e-mail address, select [E-mail Address] and enter a new address on the
displayed keyboard.
 Name
To change the recipient name, select [Name] and enter a new name on the displayed
keyboard.
When you specify a recipient from the Address Book and the recipient name is registered in
the Address Book, that recipient name is displayed.
 S/MIME Certificate
Certificates which is linked to the e-mail address is displayed.
If S/MIME is enabled, and a certificate is linked to the e-mail address, you can check the
contents of the S/MIME certificate by selecting [S/MIME Certificate].
For information on S/MIME communication, refer to "Configuration of E-mail Encryption/Digital Signature" (P.611).
From (Setting the Sender’s Address)
Specify a sender's e-mail address. You can specify only one address as a sender's address.
Note •When [Login to Local Accounts] is selected, the e-mail address registered in user information is
automatically set as a sender's address. For more information on user information, refer to "Create/
View User Accounts" (P.536).
• [From] may not be editable depending on the setting in the System Administration mode.
• When you send an e-mail with a digital signature, the items used in the signature are different
depending on the settings in the System Administration mode.
For information on a digital signature, refer to "Configuration of E-mail Encryption/Digital Signature" (P.611).
1 Select [From].
2 Select any option from the pop-up menu
displayed.
 Address Book
Allows you to select the sender's e-mail address from the Address Book.
For information on the Address Book, refer to "Address Book" (P.231).
 Keyboard
Allows you to enter the sender’s e-mail address with up to 128 characters using the
displayed keyboard.