22 Problem Solving
868
Problem Solving
22
2 Move the handle [1a] to the upper direction.
3 Remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
4 Return the handle [1a] to its original position.
5 Close the Transport Unit V1 front door.
Note • A message will be displayed and the machine will not operate if the Transport Unit V1 front door is
even slightly open.
Paper Jams in C3 Finisher or C3 Finisher with Booklet Maker
The following describes how to clear staple jams inside the finisher when the C3 Finisher
(optional) or the C3 Finisher with Booklet Maker (optional) is installed.
Paper Jams at the Handle [3a]................................................................................................................................................. 868
Paper Jams at the Handle [3a] (Using the Knob [3b])....................................................................................................... 869
Paper Jams at the Handle [3c] ................................................................................................................................................. 870
Paper Jams at the Handle [3d]................................................................................................................................................. 871
Paper Jams at the Handle [3d] (when the paper is ejected at the output area) ......................................................... 872
Paper Jams at the Booklet Unit [4] (For C3 Finisher with Booklet Maker) .................................................................... 872
Paper Jams at the Booklet Tray [4a] (For C3 Finisher with Booklet Maker).................................................................. 873
Note • A remedy differs depending on where the paper jam occurs. Follow the instructions displayed and
remove the jammed paper.
Paper Jams at the Handle [3a]
1
Open the finisher front door.
To Next Page
Loading...
