Fuji Xerox Versant 80 Press

22 Problem Solving
870
Problem Solving
22
4 Gently pull the paper to remove.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
5 Return the handle [3a] to its original position.
6 Close the finisher front door.
Note • If the finisher front door is not completely closed, a message will appear and the machine remains
paused.
Paper Jams at the Handle [3c]
1 If you can see the edge of the jammed paper
on the output tray, gently pull the paper
straight from the exit area to remove. If the
paper cannot be removed, or the paper is not
ejected at the output area, proceed to step 2.
2 Open the finisher front door.
3 Move the handle [3c] to the left.