EasyManua.ls Logo

Fuji Xerox Versant 80 Press

Fuji Xerox Versant 80 Press
1019 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stapler Faults
907
Problem Solving
22
Staple Jams in the Booklet Staple Cartridge
The following describes how to clear staple jams in the booklet staple cartridge.
The following shows the reference for the procedure.
When the C3 Finisher with Booklet Maker is installed........................................................................................................907
When the Finisher D4 with Booklet is installed.....................................................................................................................908
When the C3 Finisher with Booklet Maker is installed
The following describes how to clear staple jam occurred in the booklet staple cartridge of
the C3 Finisher with Booklet Maker (optional).
1 Make sure that the machine is not operating,
and open the finisher front door.
2 Pull out the booklet unit.
3 With grasping the lever of the booklet staple
cartridge, push the booklet staple cartridge
downward. Then, pull out the booklet staple
cartridge upward.
4 Push down the metal part of the staple
cartridge.
CAUTION
Be careful in removing jammed staples.
R2
R3

Table of Contents

Related product manuals