Loading Paper
105
Paper and Other Media
3
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do not pull the tray out that the job uses.
• To prevent paper jams or misloading, do not add paper on top of any remaining paper in the tray.
Remove any paper remaining in the tray, and then load that paper on top of the newly loaded
paper.
2 Remove any paper loaded in the tray.
3 While pinching the long-side paper guide, move
it to the desired paper size (1). While pinching
the right short-side paper guide, move it to the
desired paper size (2).
4 Load and align the edge of the paper against
the left edge of the tray, with the side to be
copied or printed on facing down.
Important • Do not load paper exceeding the maximum
fill line ("MAX" in the right figure). It may
cause paper jams or machine malfunctions.
• Do not place any paper or objects in the
empty space on the right side of trays. It may
cause paper jams or machine malfunctions.
5 Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it might cause
machine malfunctions.
Note •Affix the paper size label to the front of the paper tray.
When pulling out the paper tray, do
it slowly. If pulled out with too much
force, the tray can hit and injure
your knees.
To Next Page
Loading...
