Fuji Xerox Versant 80 Press

Output Format
203
Copy
4
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in the
orientation shown in the above table.
Paper Size and Punching Position
Note •The distance between the two holes of the Punch Unit 2/4H CD1 is 80 mm for both 2 and 4 holes.
• The distance between the two holes of the Punch Unit US 2/3H CD1 is 70 mm for 2 holes and 108
mm for 3 holes.
z
C3 Finisher (optional)/C3 Finisher with Booklet Maker (optional)
This feature is available when the Punch Unit 2/4H CD1 (optional) or the Punch Unit US
2/3H CD1 (optional) is installed.
z
Finisher D4 (optional)/Booklet Finisher D4 (optional)/Finisher D5 (optional)
The 3-hole punch is optional.
-2 holes
-3 holes
-4 holes
4 Staples 4 Top 4 Right
A4 , Letter
(8.5 x 11")
Report
Report
Report
2 Holes
Left
2 Holes
Top
2 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A4, A3, B4, 8 x 10", 8.5 x 11", 8.5 x 13", 8.5 x 14",
11 x 15", 11 x 17", 8K
3 Holes 3 Holes
Top
3 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
4 Holes 4 Holes
Top
4 Holes
Right
A4 , 7.25 x 10.5" , 8.5 x 11" , 16K
A3, 11 x 15", 11 x 17", 8K