Fuji Xerox Versant 80 Press

5 Scan
266
Scan
5
When [New] is selected
3 Select a transfer protocol.
For more information on Transfer Protocol, refer to "Transfer
Protocol (Selecting a Transfer Protocol)" (P.262).
For more information on [Browse], refer to "Browse (Specifying a
Destination PC by Browsing Your Network)" (P.267).
4 Select and set an item.
 When [FTP] is selected
The following items appear:
z
Server
z
Save in
z
User Name
z
Password
 When [SMB] is selected
The following items appear:
z
Server
z
Shared Name
z
Save in
z
User Name
z
Password
 When [SMB (UNC Format)] is selected
The following items appear:
z
Save in
z
User Name
z
Password
For more information on the setting items, refer to "Specifying a Destination (Specifying a Destination PC Using the Screen
Keyboard)" (P.268).
5 Select [Next].
Note •To return to the previous screen, select [Back].
When [Add from current location] is selected
3 Select and set an item if you change a setting.
Note •[Transfer Protocol] cannot be changed.
For more information on the setting items, refer to "Specifying a Destination (Specifying a Destination PC Using the Screen
Keyboard)" (P.268).
4 Enter each item using the keyboard displayed on the screen, and then select [Save].
For more information on the setting items, refer to "Specifying a Destination (Specifying a Destination PC Using the Screen
Keyboard)" (P.268).
5 Select [Next].
Note •To return to the previous screen, select [Back].