EasyManua.ls Logo

Fuji Xerox Versant 80 Press

Fuji Xerox Versant 80 Press
1019 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Machine Trouble
733
Problem Solving
22
Documents are
often jammed.
Are suitable types of
documents being used?
Correctly load documents suitable for the
document feeder.
Refer to "Copying Procedure" (P.126).
Are you trying to use irregular
shaped documents, business
cards, transparencies, or thin
documents?
Are you trying to use
documents with sticky tags,
paper clips or adhesive tape?
Remove sticky tags, paper clips or adhesive
tape from the document before copying.
Are the document guides set
in the correct positions?
Adjust the document guide positions.
Refer to "Copying Procedure" (P.126).
Is a piece of torn paper
remaining in the document
feeder?
Open the document feeder cover and check
inside.
Refer to "Document Jams" (P.900).
Is the [Mixed Size Originals]
setting set to [Off] when you
copy originals of different
sizes?
Set [Mixed Size Originals] to [On].
Refer to "Mixed Size Originals (Scanning Different Size
Documents Simultaneously)" (P.165).
Is an A5 document loaded in
landscape orientation ( ) on
the document feeder when
[Mixed Size Originals] is set to
[On]?
Load the A5 document in portrait orientation
().
An edge of the
document is
folded.
Is the document curled? Flatten the curl and load the document
again.
Cannot copy in
color.
Is [Output Color] set to [Black
& White]?
Set [Output Color] to [Color].
Refer to "Output Color (Selecting the Color for
Copying)" (P.148).
Is a message displayed on the
touch screen prompting you
to replace the toner
cartridge?
Replace the toner cartridge of the color
indicated in the message.
Refer to "Replacing Toner Cartridges" (P.663).
Is a message displayed on the
touch screen prompting you
to replace the drum
cartridge?
Contact our Customer Support Center.
Cannot staple
properly
Is staple jam occurred in the
staple cartridge?
Remove the staple jammed in the cartridge.
Refer to "Stapler Faults" (P.903).
Is the print driver set
correctly?
Check the [Staple] setting in [Print Setup] in
the print driver when you send a print job
from the computer.
Symptom Cause Remedy

Table of Contents

Related product manuals