22 Problem Solving
766
Problem Solving
22
012-297
012-298
012-299
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
012-319
012-326
012-334
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
013-221
013-222
[Cause] An error occurred in the Square Fold & Trimmer Module.
[Remedy] Turn the machine off and then on, and then execute the operation again. If the error
still is not resolved, contact our Customer Support Center.
013-223
[Cause] An error occurred in the Square Fold & Trimmer Module.
[Remedy] Open and close the Finisher Right Door, and then execute the operation again. If the
error still is not resolved, contact our Customer Support Center.
013-224
013-225
013-226
013-227
013-228
013-229
013-230
013-231
013-232
013-233
013-234
013-235
013-236
013-237
013-238
013-239
013-240
013-241
013-242
013-243
013-246
[Cause] An error occurred in the Square Fold & Trimmer Module.
[Remedy] Turn the machine off and then on, and then execute the operation again. If the error
still is not resolved, contact our Customer Support Center.
016-210
016-211
016-212
016-213
016-214
016-215
016-216
016-217
016-218
016-219
[Cause] An error occurred in the software.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Error Code Cause and Remedy
To Next Page
Loading...
