22 Problem Solving
780
Problem Solving
22
016-747
[Cause] The memory became insufficient when using the Repeat Image feature and the
Annotations features simultaneously.
[Remedy] Take one of the following measures:
z
Increase the annotation image size.
z
Reduce the usage of Repeat Image.
016-748
[Cause] Unable to print because of insufficient hard disk space.
[Remedy] Reduce the number of print pages by dividing the print data or by printing one copy at
a time when printing multiple copies.
016-749
[Cause] The printer language received from the print driver is unsupported by this machine.
[Remedy] Use the machine's print driver for printing. If the error still is not resolved, contact
our Customer Support Center.
016-750
[Cause] The machine received a printing job ticket with a PDF, an XPS from an application (such
as ContentsBridge) that allows direct transmissions of files, but the printing job ticket
data had a grammar or print instruction unsupported by the machine.
[Remedy] Check whether you are correctly using the application (such as ContentsBridge) and
whether the print instruction was correct.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application.
If the error still is not resolved, have the Configuration Report, the Job History Report,
and the print data with the printing job ticket ready, and contact our Customer Support
Center.
Note • XPS stands for XML Paper Specification.
016-751
[Cause] During the PDF Bridge processing, a syntax or parameter error occurred, an undefined
command was used, and a PDF file was damaged.
[Remedy] Use the print driver to print the document.
016-752
[Cause] Unable to process for PDF Bridge because of insufficient memory space.
[Remedy] Change the [Image Quality] setting from [High Resolution] to [High Quality], or from
[High Quality] to [Standard].
016-753
[Cause] The password entered does not match that of the PDF file.
[Remedy] Set the correct password on ContentsBridge.
016-755
[Cause] Attempted to process a print-protected PDF file.
[Remedy] Cancel the print protection using Adobe Acrobat
®
, and try printing again.
016-756
[Cause] Do not have permission to use the service.
[Remedy] Consult your system administrator.
016-757
[Cause] The passcode is incorrect.
[Remedy] Enter the correct passcode.
016-758
[Cause] The division does not have permission to use the service.
[Remedy] Consult your system administrator.
016-759
[Cause] The number of pages reached the maximum number of pages for this service.
[Remedy] Consult your system administrator.
016-761
[Cause] An error occurred during image processing.
[Remedy] Set [Image Quality] to [Standard] and execute the operation again. If the error still is
not resolved, set [Print Page Mode] to [On].
Error Code Cause and Remedy
To Next Page
Loading...
