Fuji Xerox Versant 80 Press

23 Appendix
920
Appendix
23
 C3 Finisher (optional)
 C3 Finisher with Booklet Maker (optional)
Type Output tray x 1 : Collate
Stack
Finisher tray x 1 : Collate (offset stacking available)/
Stack (offset stacking available)
Paper Size Output tray
Standard Size: Maximum: A3, 11 x 17"
Minimum: Postcard
Non-standard Size: Maximum: 330 x 660 mm
Minimum: 98 x 148 mm
Finisher tray
Standard Size: Maximum: A3, 11 x 17"
Minimum: B5
Non-standard Size: Maximum: 330 x 488 mm
Minimum: 203 x 182 mm
Paper Weight Output tray 52 - 350 gsm
Finisher tray 52 - 350 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (not stapled)
A4 : 3,000 sheets
B4 or larger : 1,500 sheets
Mixed stack
*
: 300 sheets or more
Z-fold stack : 30 sheets or more (A3, 11 x 17")
Finisher tray (stapled)
A4 : 200 sets (1 staple),
100 sets (2/4 staples), or 3,000 sheets
B4 or larger : 100 sets or 1,500 sheets
Mixed stack
*
: 70 sets or 200 sheets or more
Z-fold stack : 30 sheets or more (A3, 11 x 17")
* : Larger size paper is stacked on top of smaller size paper.
Important • When using FX P paper.
Staple Capability : 50 sheets (90 gsm or less)
Paper Size : Maximum: A3, 11 x 17",
Minimum: B5
Position : 1 place (angled: front/back, parallel: back),
2/4 places (parallel)
Punch Number of Holes : 2/4 holes or 3 holes
Paper Size : Maximum: A3, 11 x 17",
Minimum: B5 (2 holes), A4 , 8.5 x 11" (4 holes)
Paper Weight : 52 - 200 gsm
Dimensions Width 840 x Depth 589 x Height 1,056 mm
Weight 47 kg
Type Output tray x 1 : Collate
Stack
Finisher tray x 1 : Collate (offset stacking available)/
Stack (offset stacking available)
Booklet tray x 1 : Collate
Stack