23 Appendix
922
Appendix
23
Finisher D4 (optional) / Finisher D5 (optional)
Type Output Tray Collate / Stack
Finisher Tray Collate / Stack (offset stacking available)
Paper Size Output Tray Standard size: Maximum: A3, 11 x 17" mm
Minimum: Postcard
Non-standard size: Maximum: 330 x 488 mm
Minimum: 98 x 148 mm
Finisher Tray Standard size: Maximum: A3, 11 x 17"
Minimum: B5
Non-standard size: Maximum: 330 x 488 mm
Minimum: 182 x 182 mm
Paper Weight Output Tray 52 - 350 gsm
Finisher Tray 52 - 300 gsm
Stacker
Capacity
Note
z
When using
FX P Paper.
Output Tray 500 sheets
Finisher Tray
(with no staple)
A4 :
Finisher D4: 3,000 sheets,
Finisher D5: 2,000 sheets
B4 or larger: 1,500 sheets
Mix stack: 350 sheets
*
*:When using FX P Paper.
Important •
*
When larger size papers are loaded on smaller
size papers.
Finisher Tray
(with staple)
A4 :
Finisher D4: 200 sets or 3,000 sheets
Finisher D5: 200 sets or 2,000 sheets
B4 or larger: 100 sets or 1,500 sheets
Staple Capacity 100 sheets
Important • When using FX P Paper.
• 65 sheets when using paper larger than A4 / 8.5
× 11".
Staples may be bent depending on the deployment
conditions such as Paper Weight.
Paper Size Standard Size: Maximum: A3, 11 × 17"
Minimum: B5
Position <1 place>
Front: Angled stapling
Center: Parallel stapling
Rear: Parallel stapling
Angled stapling (A3 and A4 only)
<2 places>
Parallel stapling
<4 places>
Parallel stapling
Punch Number of Holes 2 or 4, 3 (optional)
Paper Size Maximum: A3, 11 × 17"
Minimum: B5 (2 holes), A4 , 8.5 x 11" (4 holes)
Paper Weight 52 - 220 gsm
To Next Page
Loading...
