EasyManua.ls Logo

Fuji Xerox Versant 80 Press

Fuji Xerox Versant 80 Press
1019 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23 Appendix
996
Appendix
23
z
When installing the machine in an environment that is operating a mail transfer agent
(MTA) in a private segment, set the machine to adapt to the operation system being used.
z
For information about supported ISPs, contact our Customer Support Center.
Feature Specifications
Details of the features related to e-mail are as follows:
z
Transmission specifications
z
Authentication for transmission
z
Receiving specifications
Note IMAP4 is not supported.
IP Address Settings
The machine does not support a global IP address. Be sure to use the machine in an
environment using IP masquerade.
z
Operating with fixed address
Register the machine's IP address on a router or a server managing IP addresses for
domain control servers.
z
Operating with DHCP
Setting is not required. Depending on settings of the router and the DHCP server,
registration may be required. Confirm operation rules for the router and DHCP server you
are using. When access is restricted by MAC address, registration on the DHCP server may
be required.
Settings from the Control Panel
Before you use the E-mail service, set the maximum data size for sending e-mail on the
control panel. For more information on the maximum limit, refer to the ISP guidelines. The
recommended value is 1 to 2 MB.
In the System Administration mode, select [Tools] > [System Settings] > [E-mail Service
Settings] > [E-mail Control] > [Maximum Total Data Size] to configure the setting.
For more information on setting, refer "Maximum Total Data Size" (P.507).
Supported protocol : SMTP
Port number : 25 (default)
SMTP authentication : AUTH GSSAPI (only for Kerberos), AUTH
NTLMv2, AUTH NTLMv1, AUTH PLAIN,
AUTH LOGIN, and AUTH CRAM-MD5
POP before SMTP : Plain and APOP
Waiting time for POP authentication : cannot be changed
Encryption communication (SSL) : supported
Supported protocol : POP3
POP3 port number : 110 (default)
Authentication method for POP3 : Plain and APOP
E-mail processing after POP3 reception : deletes e-mail received from a server after
reception. Settings to store e-mail on the
server is not supported.
Encryption communication (SSL) : not supported

Table of Contents

Related product manuals