© 2011 Fujitsu Technology Solutions
140
Unicast Poll Retry - Specifies the number of times to retry a request to an SNTP server after the
first time-out before attempting to use the next configured server when configured in unicast mode.
Allowed range is (0 to 10). Default value is 1.
Multicast Poll Interval - Specifies the number of seconds between multicast poll requests
expressed as a power of two when configured in multicast mode. Multicasts received prior to the
expiry of this interval are discarded. Allowed range is (6 to 10) . Default value is 6.
Command Buttons
Apply - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
To Next Page
Loading...
