Fujitsu PRIMERGY BX900 - Page 143

© 2011 Fujitsu Technology Solutions
141
9.2.9.2 Global Status
Figure : SNTP Global Status
Non-Configurable Data
Version - Specifies the SNTP Version the client supports.
Supported Mode - Specifies the SNTP modes the client supports. Multiple modes may be
supported by a client.
Last Update Time - Specifies the local date and time (UTC) the SNTP client last updated the
system clock.
Last Attempt Time - Specifies the local date and time (UTC) of the last SNTP request or receipt of
an unsolicited message.
Last Attempt Status - Specifies the status of the last SNTP request or unsolicited message for both
unicast and broadcast modes. If no message has been received from a server, a status of Other is
displayed. These values are appropriate for all operational modes.
• Other - None of the following enumeration values.
• Success - The SNTP operation was successful and the system time was updated.
• Request Timed Out - A directed SNTP request timed out without receiving a response from
the SNTP server.
• Bad Date Encoded - The time provided by the SNTP server is not valid.
• Version Not Supported – The SNTP version supported by the server is not compatible with
the version supported by the client.
• Server Unsynchronized - The SNTP server is not synchronized with its peers. This is
indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death - The SNTP server indicated that no further queries were to be sent to
this server. This is indicated by a stratum field equal to 0 in a message received from a
server.
Server IP Address - Specifies the IP address of the server for the last received valid packet. If no
message has been received from any server, an empty string is shown.
Address Type - Specifies the address type of the SNTP Server address for the last received valid
packet.