Fujitsu PRIMERGY BX900 - Page 449

© 2011 Fujitsu Technology Solutions
447
10.4.7.2 Configuration Commands
10.4.7.2.1 Set IGMP snooping querier admin mode
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier admin mode, use
the ip igmp snooping querier global configuration command. Use the no ip igmp snooping querier to
disable.
Syntax
ip igmp snooping querier
no ip igmp snooping querier
Default Setting
Disable
Command Mode
Global Config
10.4.7.2.2 Set IGMP snooping querier address
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier address, use the ip
igmp snooping querier address <ip-address> global configuration command. Use the no ip igmp
snooping querier address return to default value zero.
Syntax
ip igmp snooping querier address <ip-address>
no ip igmp snooping querier address
Default Setting
0
Command Mode
Global Config