© 2011 Fujitsu Technology Solutions
593
10.6.18.2 show sflow pollers
Use this command to display the sFlow polling instances created on the switch.
Syntax
show sflow pollers
Default Setting
None
Command Mode
Privileged Exec
Display Message
Poller Data Source: The sFlowDataSource (slot/port) for this sFlow poller. This agent will support
Physical ports only.
Receiver Index: The sFlowReceiver associated with this sFlow counter poller.
Poller Interval: The number of seconds between successive samples of the counters associated with
this data source.
To Next Page
Loading...
