Fujitsu PRIMERGY BX900 - Page 608

© 2011 Fujitsu Technology Solutions
606
This command disables logging to hosts.
Syntax
logging host remove <hostindex>
<hostindex> - Index of the log server.
Default Setting
None
Command Mode
Global Config
This command reconfigures the IP address of the log server.
Syntax
logging host reconfigure <hostindex> {host <ipAddr|ipv6Addr|hostname> | port <port> | severitylevel
<level>}
<hostindex> - Index of the log server.
host - Change New Logging Host IP Address.
<ipAddr|ipv6Addr|hostname> - New IPv4/IPv6 address or Hostname of the log server.
<addresstype> - Logging Host Address Type (ipv4, ipv6, dns or dnsv6).
port - Change New Logging Host Port.
<port> - New port value in the range <1 - 65535>.
severitylevel - Change New Logging Host Severity Level.
[<severitylevel> | <0-7>] - New value is specified as either an integer from 0 to 7 or symbolically
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
Default Setting
None
Command Mode
Global Config