Fujitsu PRIMERGY BX900 - Page 609

© 2011 Fujitsu Technology Solutions
607
10.7.4.6 logging syslog
This command enables syslog logging.
Syntax
logging syslog
no logging syslog
no - Disables syslog logging.
Default Setting
None
Command Mode
Global Config
This command sets the local port number of the LOG client for logging messages.
.
Syntax
logging syslog port <portid>
no logging syslog port
no - Resets the local logging port to the default.
<portid> - Port ID from 1 to 65535
Default Setting
None
Command Mode
Global Config