Fujitsu PRIMERGY BX900 - Page 740

© 2011 Fujitsu Technology Solutions
738
Note: The CLI mode is changed to Class-Map Config when this command is successfully
executed.
Command Mode
Global Config
10.17.2.2 no class-map
This command eliminates an existing DiffServ class.
Syntax
no class-map <class-map-name>
<class-map-name> is the name of an existing DiffServ class.
Note: The class name 'default' is reserved and is not allowed here. This command may be issued at any
time; if the class is currently referenced by one or more policies or by any other class, this deletion attempt
shall fail.
Command Mode
Global Config