Fujitsu PRIMERGY BX900 - Page 741

© 2011 Fujitsu Technology Solutions
739
10.17.2.3 class-map rename
This command changes the name of a DiffServ class.
Syntax
class-map rename <class-map-name> <new-class-map-name>
<class-map-name> is the name of an existing DiffServ class.
<new-class-map-name> is a case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying the class.
Note: The class name ‘default’ is reserved and must not be used here.
Default
None
Command Mode
Global Config
10.17.2.4 match any
This command adds to the specified class definition a match condition whereby all packets are considered
to belong to the class.
Syntax
match any
Default
None
Command Mode
Class-Map Config