Fujitsu PRIMERGY BX900 - Page 803

© 2011 Fujitsu Technology Solutions
801
10.21.2.2 pin-group rename <old-groupname> <new-groupname>
Change the pin-group name to an new one.
Syntax
pin-group rename <old-groupname> <new-groupname>
<old-groupname> - Specify the old name of a pin-group.
<new-groupname> - Specify the new name for a pin-group.
Default Setting
None
Command Mode
Global Config
10.21.2.3 pin-group uplink-sync {auto | manual}
Enabling this feature, the VLAN configuration of uplinks will be synchornized automatically with its pinning
members (downlinks). Use “no pin-group uplink-sync” to disable this feature.
Syntax
pin-group uplink-sync {auto | manual}
no pin-group uplink-sync
<auto> - To perform continuous uplink VLAN synchronization.
<manual> - To perform one-time uplink VLAN synchronization.
Default Setting
Disabled
Command Mode
Global Config