▶
"Disconnecting the power cord" on page 47
.
▶
"Getting access to the component" on page 49.
▶
"Removing the air duct" on page 65.
Removing the defective heat sink
▶
Remove the heat sink, see "Removing the heat sink" on page 233.
▶
Remove the residual thermal paste from the CPU surface.
▶
Clean the CPU surface using a lint-free cloth.
Installing the new heat sink
▶
Remove the protective cover on the underside of the new heat sink.
CAUTION
▶
Do not touch the thermal paste on the underside of the heat sink.
▶
Install the heat sink, see "Installing the heat sink" on page 240
.
Concluding steps
▶
"Installing the air duct" on page 66.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 57.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
Processor (CPU)
242 Upgrade and Maintenance Manual RX1330 M5
To Next Page
Loading...
