Fujitsu PRIMERGY RX1330 M5 User Manual

▶
Set the TPM Support and TPM State
settings to Disabled.
▶
Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
Removing the TPM
▶
Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 243: Removing the TPM screw
System board and components
RX1330 M5 Upgrade and Maintenance Manual 301

Fujitsu PRIMERGY RX1330 M5 Specifications

General

Processor Sockets	1
Memory	Up to 128 GB
Memory Type	DDR4
Form Factor	1U rack server
Memory Slots	4 DIMM slots
Storage	Up to 4x 3.5" or 8x 2.5" drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Network	2x 1GbE LAN ports
Power Supply	800W