EasyManuals Logo

Fujitsu PRIMERGY RX1330 M5 User Manual

Fujitsu PRIMERGY RX1330 M5
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #354 background imageLoading...
Page #354 background image
Status Description
flashing orange slowly HDD/SSD RAID rebuild is in progress. Data is being
restored after replacing a drive that has been
combined into a RAID array.
16.2.3 Server rear
16.2.3.1 Connectors on the server rear
Figure 279: Connectors on the server rear
1 USB 2.0 Type A connectors (2x)
2 USB 3.2 Gen 2 Type A connectors (2x)
3 Video connector (VGA)
4 Management LAN connector (for iRMC
server management function)
5 Shared LAN connector (LAN1)
6 Standard LAN connector (LAN2)
Depending on the BIOS settings, the shared LAN connector may also
be used as a management LAN connector. For more information, see
the corresponding BIOS Setup Utility reference manual.
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Appendix A
354 Upgrade and Maintenance Manual RX1330 M5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX1330 M5 and is the answer not in the manual?

Fujitsu PRIMERGY RX1330 M5 Specifications

General IconGeneral
Processor Sockets1
MemoryUp to 128 GB
Memory TypeDDR4
Form Factor1U rack server
Memory Slots4 DIMM slots
StorageUp to 4x 3.5" or 8x 2.5" drives
RAID SupportRAID 0, 1, 5, 6, 10, 50, 60
Network2x 1GbE LAN ports
Power Supply800W

Related product manuals