GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 3 - Setup Instructions 3-49
3-7-5-2 P95D - Printer Settings (cont’d)
4.) Select the
IMAGE ADJUST page (see: Figure 3-50 below) and select:
- Simple : brightness: 3, Contrast : -7
5.) For saving the adjusted printer settings click APPLY
and then OK.
Finally close the ‘Printers’ -window with the close button and exit System Setup with SAVE&EXIT
.
6.) Assign the Printer to the remote keys P1
, P2, and/or P3/DVR with the save button;
see: Section 3-7-6 "Remote Control Selection" on page 3-53.
Figure 3-50 Image Adjust page
To Next Page
Loading...
