GE Voluson P6 - 4-4-5-1 Pre-Volume Mode Functions

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 4 - Functional Checks 4-19
4-4-5-1 Pre-Volume Mode Functions
Figure 4-13 Pre-Volume Mode menus (e.g., 4D Real Time)
Table 4-7 Pre-Volume Mode Functions
Step Task Expected Results
1
AQUISITION:
• 3D STATIC
3D Volume Mode - Static volume acquisition (also in combination with PD, HD-Flow or CFM)
1. Select the desired Volume Mode:
2. select the desired
The Volume Mode function is switched on, the “3D Pre” respectively “4D Pre”
menu appears on the screen (write mode)
Visualization Mode
3. Start the Volume Acquisition with the right trackball key.