GE Voluson P6 - 3-5-6 Connecting the Footswitch

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 3 - Setup Instructions 3-19
3-5-6 Connecting the Footswitch
The footswitch should be directly connected to any accessible USB-port on the Voluson® P8 /
Voluson® P6 (e.g., on rear of the system).
NOTE: Connection of the Footswitch is always the same.
After physical connection, adjust the Footswitch (Left/Right) as described in Section 3-8-1-6 "How to
adjust function of the Footswitch (Left/Middle/Right)" on page 3-58.
Figure 3-10 Footswitch connection scheme