GE Voluson P6 - 8-45-5 Installation Procedure

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-111
3.) Open keyboard assembly.
4.) Remove ECG clamp.
Figure 8-142 ECG Clamp
8-45-5 Installation Procedure
1.) Assemble ECG kit on keyboard base.
2.) Fasten ECG kit with Keyboard base using 2 screws (2159625-screw w/SP PH m4x8). Tie the USB
cable with tie (2160955- cable-tie, DACT-100A) as shown.
Figure 8-143 ECG kit