GE Voluson P6 - 7-5-4 How the FE remotely Connect to Device (Total Access Session)

GE HEALTHCARERAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
7-18 Section 7-5 - Remote Access to Service Platform
7-5-4 How the FE remotely Connect to Device (Total Access Session)
1.) On the remote workstation start the Internet Explorer and navigate to the enterprise server:
https://plt2-insite2.health.ge.com/qss/gelogin.jsp and login with your SSO and password.
2.) Select the Search icon at top of the “Groups” frame (see: Figure 7-20 below).
3.) Enter an “asterisk followed by the systems serial number” in the “Name” field
for example: *09999 (* + system’s serial number without prefix-letter) and then click SEARCH
.
4.) Select and confirm (double-click) the proper Voluson® P8 / Voluson® P6 from the “Device Search
Result” frame.
Figure 7-20 Search for System
Device Search result = e.g., KP8A09999
prefix KP8 + systems serial number without prefix-letter
enter “Name”