GE Voluson P6 - 3-7-3-3 Prepare the Printer and connect the Bluetooth Printer Adapter; 3-7-3-4 Installing the printer software;driver

GE HEALTHCARERAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
3-36 Section 3-7 - Printer Installation
3-7-3-3 Prepare the Printer and connect the Bluetooth Printer Adapter
3-7-3-3-1 HP Officejet H470 Printer
1.) Prepare the Color Printer:
* Connect the power cord to a wall outlet socket and then turn on the printer.
* Load paper in the auto sheet feeder.
* Install ink tanks in the correct order.
2.) Connect the HP Bluetooth Printer Adapter to the direct USB print port of the printer.
NOTE: When the Bluetooth adapter is properly attached to the printer, the Power lamp will flash on.
3.) Proceed with Section 3-7-3-4 "Installing the printer software/driver" .
3-7-3-4 Installing the printer software/driver
1.) Press CTRL
+ ESC to open the Start menu and open "My Bluetooth Places" (see: Figure 3-25).
NOTICE
!! NOTICE:
Preparations as well as Printer Adapter connection depend on the used Bluetooth Line Printer.
• in case of HP Officejet H470, proceed with Section 3-7-3-3-1 on page 3-36
Figure 3-29 Connection of Bluetooth Printer Adapter (HP Officejet H470)
NOTICE
!! NOTICE:
Be sure that during installation only the ultrasound system dedicated Bluetooth printer is powered on!