GE Voluson P6 - Section 4-4 Functional Checks

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 4 - Functional Checks 4-7
Section 4-4
Functional Checks
For a basic functional check of the system’s different modes, following pages will familiarize you with
image optimization for:
• 2D Mode (B Mode), see: Section 4-4-1 on page 4-8
• Additional (optional) Operating Modes, see: Section on page 4-11
-XTD-View
• M Mode, see: Section 4-4-2 on page 4-12
- MCFM Mode
• Spectral Doppler Modes, see: Section 4-4-3 on page 4-14
- PW - Pulsed Wave Doppler
- CW - Continuous Wave Doppler
• Color Doppler Modes, see: Section 4-4-4 on page 4-16
- CFM - Color Flow Mode
- PD - Power Doppler
- HD-Flow - Bi-Directional Angio
• Volume Modes, see: Section 4-4-5 on page 4-18
- 3D Static
- 4D Real Time
- 4D Biopsy
- VCI - Volume Contrast Imaging (A-Plane, C-Plane and VCI Static)
NOTE: Some software may be considered standard depending upon system configuration.
If any Modes or Options are not part of the system configuration, the check can be omitted.
NOTE: Different menus are displayed depending on which Mode is selected.
Some function keys only appear if they are available for the selected probe.