GE Voluson P6 - Section 8-20 Replacement of the TGC BOARD; 8-20-1 Manpower; 8-20-2 Tools; 8-20-3 Preparations

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-47
Section 8-20
Replacement of the TGC BOARD
8-20-1 Manpower
One person, 10 minutes
8-20-2 Tools
Philips Screwdriver
8-20-3 Preparations
1.) Power Off/Shutdown the system as described in 4-3-2 on page 4-4.
8-20-4 Removal Procedure
1.) Follow the removal procedure of Section 8-19-4 (step 1~3)
2.) Remove 8 TGC KNOBS. Refer to the figure below.
Figure 8-57 Removing 8 TGC KNOBS