GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-21
7-5-5 Virtual Network Computing (VNC)
1.) In the Total Access Session window (see: Figure 7-22 on page 7-20) find the item labeled
UL_VNC and click on the [Connect] button. Within ~ 1 minute the “Proxy Config” window opens.
2.) If available and required enter the correct proxy server address and then click [OK].
3.) The next window shows the command to be issued, click on [OK] to grant the request.
The “virtual” Monitor of the Voluson® P8 / Voluson® P6 is displayed on your remote workstation screen.
NOTICE
!! NOTICE:
The system may require a correct proxy configuration. Please ask the customer.
Figure 7-23 Proxy Config
Figure 7-24 “virtual” Monitor Screen of Voluson® P8 / Voluson® P6
if required, enter the correct
proxy server address from
your location
Toolbar with
useful options
To Next Page
Loading...
