GE HEALTHCARERAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
7-72 Section 7-13 - Error Messages
RT_RFProcessingBlockTissue::vCheckRFDataSizeAndUpdateBuffers: Memory
allocation failed.
Action: restart the system, If after restart not ok then call technical support
restart the system
RT3D.cpp rot phased: unexpected O_AxisAngle ? restart the system
RT-TissueFilter DLL call failed. Action: restart system restart the system
SamplePRF too big. Action: restart system restart the system
see <InfoValid> with disconnected ECG, xx of xx cycles OK (Test output, no error message)
Setting Timer failed! restart the system
SlowMotion 3D in Color must have decimation of value 1 restart the system
SRI: filter creation failed restart the system
Start Bandwidth too small restart the system
Start ET too small restart the system
Start frequency too small restart the system
Still DICOM images available! DICOM images available
Stop device failed. It is probably still in use, please try to stop it later. check if there is still a file open from the volume and retry
StoragePool: Not sufficient replay storage for B & CF Mode available restart the system
StoragePool: Not sufficient replay storage for ECG available restart the system
StoragePool: Not sufficient replay storage for M Mode available restart the system
StoragePool: Not sufficient replay storage for MC or PW Mode available restart the system
System must be restarted. Reason: Corrupt Factory Settings restart the system
System must be restarted.\nReason: Corrupt Factory Settings. Choose ""Ok"" to use
Safety-Copy after Restart. Choose ""Cancel"" and load Factory Settings from
Backup after restart.
restart the system
The "Current Password" does not match the actual password. enter correct password
The "New Password" does not match with "Retype new password". retype both passwords
The Database UserPrograms Corrupted. Action: Restart the system restart the system
The Date format not stored properly. Action: close registry, restart, try again close registry, restart the system and try again
The device can now be safely removed from the system. press ok and remove the USB volume
The entered password does not match the actual password. enter correct password
The Handle Unregistered. Action: close registry, restart, try again close registry, restart the system and try again
The Registry not closed. Action: close registry, restart, try again restart the system
Error Messages Actions
To Next Page
Loading...
