○○○○○○○○○○○○○○○○○○○○○○○
Songs 2•45
Clear Song
If you are not satisfied with how a track of a Song plays, you can cancel the
track using the CLEAR function.
1. Select the Song that you want to work on and hold down the RECORD
button (in the Sequencer) for about 2 seconds.
The first CLEAR option (Clear All) is displayed.
2. Use the PAGE buttons to select the Clear option required.
ALL : Clears (initializes) the SONG except the last programmed
Preset. In practice, only the recorded sequences are can-
celled leaving the Song Preset intact.
TEMPO : Cancels any Tempo changes that may have been recorded
in the Tempo track.
COMMON : Cancels all events from the Common track (for example,
Effect changes that may have been made at the time of
recording the Song).
TRACK 01 - 16 : Cancels the selected track. Use the Tempo/Data buttons
to select other tracks.
3. Press ENTER.
A confirmation request appears (Sure?).
4. Press ENTER again to confirm the Clear operation.
Your Songs remain intact in memory even after power down.
To Next Page
Loading...
Need help?
General
