○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2•46 User Guide
Displaying Lyrics
If your Song contains a Lyrics track, an external monitor can show the lyrics in
playback, allowing you to sing along with the Song.
In public venues, the lyrics can be projected onto an external colour monitor for
the audience to sing along with (Karaoke application).
To display lyrics on an external monitor or domestic TV
1. Connect the RGB connector to the SCART socket of a domestic TV, or
the RGB socket of a computer monitor.
PS1000 is suplied with a special RGB/SCART video cable.
PS1000 is set by default to communicate with video systems conforming to
the PAL (European) standard.
For U.S.A. systems which use the NTSC standard, set the “TV” parameter
to NTSC under the MIDI/GENERAL function. If your TV set is fitted with the
S-VHS socket, use the PS1000 rear panel S-VHS connector.
2. Go to the “TV Text” page under the MIDI/GENERAL function and check
that the option is set to ON (default setting) to enable the connection
between the instrument and the TV set.
Use the PAGE button to select the TV Text page and use the TEMPO/
DATA / buttons to toggle between the On and Off status.
3. Tune the TV to the AV channel.
To select the AV channel, consult the owner’s manual of the television set.
Computer monitors or studio videos normally operate in AV mode.
4. Select a Song using the method already described.
5. Press PLAY/STOP or START/STOP to start the playback.
The external monitor will scan the lyrics of the Song in synchronization with
the playback.
To Next Page
Loading...
Need help?
General
