GEM PS1000 - System Exclusive

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2•62 User Guide
SYSTEM EXCLUSIVE (Generalmusic System Exclusive)
Via MIDI, PS1000 is able to recognize several System Exclusive messages
that control parameters relating to the effects, master tunings and master trans-
pose. The corresponding SysEx strings for the parameters are as follows:
REVERB CHANGE
F0,2F,30,01,00,00,00,13,00,vv,F7 (vv = from 00h to 15h) REVERB LEVEL
F0,2F,30,01,00,00,00,13,01,vv,F7 (vv= from 00h to 7Fh) REVERB TIME
F0,2F,30,01,00,00,00,13,02,vv,F7 (vv= from 00h to 7Fh) CHORUS CHANGE
F0,2F,30,01,00,00,00,13,05,vv,F7 (vv= from 00h to 15h) CHORUS LEVEL
F0,2F,30,01,00,00,00,13,06,vv,F7 (vv= from 00h to 7Fh) CHORUS RATE
F0,2F,30,01,00,00,00,13,07,vv,F7 (vv= from 00h to 7Fh) CHORUS DEPTH
F0,2F,30,01,00,00,00,13,08,vv,F7 (vv= from 00h to 7Fh) MASTER TUNE
F0,2F,30,01,00,00,00,07,00,vv,F7 (vv= standard value 40h + / - 40h)
MASTER TRANSPOSE
F0,2F,30,01,00,00,00,09,02,vv,F7 (vv= standard value 18h + / - 18h
semitones)
IMPORTANT: All the numbers within the SysEx string must be expressed as
“HEXADECIMAL” codes. Specific midi channels are not required for system
exclusive messages.
Note: The reverb volume selected from the
instrument panel must be set to its maximum
setting (127).