b Introduction
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Some useful preliminary notes
Please read the following important preliminary notes before starting to play
your instrument.
Do not place floppy disks on top of speakers, near magnets, telephones, or
other sources of electromagnetic fields. The disk contents could be damaged.
Upgrading your instrument
To implement new functions in your PS1000/1300, you can upgrade the instru-
ment as described below.
1. Before turning on the PS1000/1300, insert the floppy disk containing the
latest release of the Generalmusic Operating System.
2. Turn on the instrument. The message “Load OS?” appears in the display.
3. Press ENTER to confirm (pressing ESCAPE cancels the operation).
4. After pressing ENTER, the display shows the message “Loading!”.
5. When the operation is complete, the PS1000/PS1300 is ready to play.
NB. To check the version of the Operating System, select the last page of the
MIDI/GENERAL function.
SYSTEM RESET
To restore the instrument’s factory set status (default settings), proceed as de-
scribed below:
1. Hold down the UPPER 1 activator button (located to the right of the
display) and simultaneously press the top three buttons 1, 2 and 3 of the
SOUND GROUPS section.
The display shows the message “SysRESET” for a few seconds then sets
with the Grand Piano Preset ready for playing.
Warning
The Reset operation cancels all user-programmed data contained in the instru-
ment’s RAM memory and restores it to the original factory conditions.
To Next Page
Loading...
Need help?
General
